The purpose of this product development is to help small and micro enterprises upgrade automation equipment. At the same time, it only needs to invest very little. The functions developed in the first version come from market collection. If these functions can not meet your needs, please don’t lose heart. Leave your detailed needs to customer service as a reference for the next version upgrade. Let’s work together to improve the products and meet our customers.
At present, three main modes are set inside the controller:
Mode 1: induction working mode: when an object is sensed, the conveyor belt stops running and triggers the third-party equipment to work. The third-party equipment completes the work and the conveyor belt starts, so as to cycle.
Mode 2: automatic feeding mode. When an object is sensed, the conveyor belt stops running. After the object is taken away, the object behind will automatically move forward to the sensor position. It can be used together with manipulator
Mode 3: timing movement mode, conveyor belt closing opening cycle operation, which can make articles without spacing produce a certain spacing on another conveyor belt. There are two groups of time to control, T1 closing – T3 opening cycle, timing range: 0.01 seconds – 999.9 seconds
Mode 4: regular reservation mode B T1 off – T3 on cycle, timing range: 0.01 minutes – 999.9 hours
Mode 5: scheduled reservation mode C T3 on-t1 off cycle, timing range: 0.01 minutes – 999.9 hours
This application range can be said to be very wide. It can realize flexible control of conveyor belt at low cost. DC12V and 110V-220V conveyor belts are supported by default,
High power 220V conveyor belt needs external AC contactor, and 380V conveyor belt can also be controlled through external AC contactor,
Support third-party equipment: it can be linked with the equipment with foot switch, such as liquid filling machine, paste filling machine, pneumatic filling machine, inkjet printer, marking machine, particle dispensing machine, automatic feeding,
The linkage with third-party equipment is controlled by foot switch. There are two kinds of foot switches in the market. One is wired and can be used directly, and the other is connected to the air pipe. A DC12V pneumatic solenoid valve needs to be provided by itself,
Both methods can be used. Tell the customer service your demand type before purchase. We need to set the output signal type at the slave pedal output interface
The above functions can not meet your needs. You can contact customer service for consultation and customize it for you!
Specification: Auto Filling Machine Controller And Conveyer Belt Automatic Design DIY Device Can Connect To Big Conveyor And Filler